2017-2025 Ford CHMSL / Bed Camera Relocation Kit
Plug-and-Play Bed Camera Relocation Kit for ALL Ford F-Series Trucks 2017-2025
Product Overview: This kit is the perfect solution for Ford F-Series truck owners who want to use their bed camera but find their CHMSL (Center High-Mount Stop Lamp) bed camera view blocked by obstacles like flatbeds, fuel tanks, backracks, truck caps, camper shells, or rollover bars. It works seamlessly with any Ford F-Series truck equipped with a bed or cargo camera.
Simple Installation: Easily remove your factory camera and install our adapter cable plug. Attach it to the new connection that emerges through the viewing hole, then connect it to your chosen camera option—whether it’s our ANYWHERE Auxiliary Camera or your OEM camera. Mount it where it suits you best, and enjoy a camera that’s finally functional again with better resolution and usability.
Ideal for Trucks With:
• Truck Caps
• Blocked 5th Wheel Hitch or Gooseneck Ball
• Objects obstructing the CHMSL camera view
For those needing to relocate the camera to a further location, extension cables are available in our accessories section. Mix and match any sizes or lengths to suit your needs.
Important Notes:
• If Mounting on a vertical Plane please use a 1” Straight Extension due to connector spacing. Found in our Accessories Section.
• 2023 and 2025 Models: For these years it not recommend using our CSPNW Camera due to a video pipeline bottleneck in the new processing modules. This compression may reduce our higher bandwidth video signal, though video quality will be nearly the same. However, you’ll still benefit from improved lens distortion. 17-22 Model years on Superdutys will see a nice video improvement!
Options:
1. Our Camera: Enjoy a hanging or upright mounting option. The mount can be installed on the top or bottom, depending on your preferred camera location. Pushing 1500TVL at just .001 Lux with a nicer lens distortion!
2. OEM Camera: Reuse your existing OEM camera (OEM camera not included). The housing design is reversible, allowing you to pivot the housing at the top or bottom, depending on your preference. The connector for the OEM camera must always face down due to its design.
3. Both - Best Value!: Can’t decide? Get both our camera and the housing for your OEM camera, so you have your OEM one as a backup. Cameras are just a quick snap to change!
• Note: Relocation further than 1 FT requires purchase of extension cables (Sold in our Accessories Section). Due to the higher image quality of our camera, F150 and Superduty 23-25 models may experience a slight “step effect” on curved lines if you look closely. This anomaly is not present in 2017-2022 Super Duty models.
• Pictures shown is an F150
Warranty: This product comes with a 1-year warranty.
Plug-and-Play Bed Camera Relocation Kit for ALL Ford F-Series Trucks 2017-2025
Product Overview: This kit is the perfect solution for Ford F-Series truck owners who want to use their bed camera but find their CHMSL (Center High-Mount Stop Lamp) bed camera view blocked by obstacles like flatbeds, fuel tanks, backracks, truck caps, camper shells, or rollover bars. It works seamlessly with any Ford F-Series truck equipped with a bed or cargo camera.
Simple Installation: Easily remove your factory camera and install our adapter cable plug. Attach it to the new connection that emerges through the viewing hole, then connect it to your chosen camera option—whether it’s our ANYWHERE Auxiliary Camera or your OEM camera. Mount it where it suits you best, and enjoy a camera that’s finally functional again with better resolution and usability.
Ideal for Trucks With:
• Truck Caps
• Blocked 5th Wheel Hitch or Gooseneck Ball
• Objects obstructing the CHMSL camera view
For those needing to relocate the camera to a further location, extension cables are available in our accessories section. Mix and match any sizes or lengths to suit your needs.
Important Notes:
• If Mounting on a vertical Plane please use a 1” Straight Extension due to connector spacing. Found in our Accessories Section.
• 2023 and 2025 Models: For these years it not recommend using our CSPNW Camera due to a video pipeline bottleneck in the new processing modules. This compression may reduce our higher bandwidth video signal, though video quality will be nearly the same. However, you’ll still benefit from improved lens distortion. 17-22 Model years on Superdutys will see a nice video improvement!
Options:
1. Our Camera: Enjoy a hanging or upright mounting option. The mount can be installed on the top or bottom, depending on your preferred camera location. Pushing 1500TVL at just .001 Lux with a nicer lens distortion!
2. OEM Camera: Reuse your existing OEM camera (OEM camera not included). The housing design is reversible, allowing you to pivot the housing at the top or bottom, depending on your preference. The connector for the OEM camera must always face down due to its design.
3. Both - Best Value!: Can’t decide? Get both our camera and the housing for your OEM camera, so you have your OEM one as a backup. Cameras are just a quick snap to change!
• Note: Relocation further than 1 FT requires purchase of extension cables (Sold in our Accessories Section). Due to the higher image quality of our camera, F150 and Superduty 23-25 models may experience a slight “step effect” on curved lines if you look closely. This anomaly is not present in 2017-2022 Super Duty models.
• Pictures shown is an F150
Warranty: This product comes with a 1-year warranty.
Plug-and-Play Bed Camera Relocation Kit for ALL Ford F-Series Trucks 2017-2025
Product Overview: This kit is the perfect solution for Ford F-Series truck owners who want to use their bed camera but find their CHMSL (Center High-Mount Stop Lamp) bed camera view blocked by obstacles like flatbeds, fuel tanks, backracks, truck caps, camper shells, or rollover bars. It works seamlessly with any Ford F-Series truck equipped with a bed or cargo camera.
Simple Installation: Easily remove your factory camera and install our adapter cable plug. Attach it to the new connection that emerges through the viewing hole, then connect it to your chosen camera option—whether it’s our ANYWHERE Auxiliary Camera or your OEM camera. Mount it where it suits you best, and enjoy a camera that’s finally functional again with better resolution and usability.
Ideal for Trucks With:
• Truck Caps
• Blocked 5th Wheel Hitch or Gooseneck Ball
• Objects obstructing the CHMSL camera view
For those needing to relocate the camera to a further location, extension cables are available in our accessories section. Mix and match any sizes or lengths to suit your needs.
Important Notes:
• If Mounting on a vertical Plane please use a 1” Straight Extension due to connector spacing. Found in our Accessories Section.
• 2023 and 2025 Models: For these years it not recommend using our CSPNW Camera due to a video pipeline bottleneck in the new processing modules. This compression may reduce our higher bandwidth video signal, though video quality will be nearly the same. However, you’ll still benefit from improved lens distortion. 17-22 Model years on Superdutys will see a nice video improvement!
Options:
1. Our Camera: Enjoy a hanging or upright mounting option. The mount can be installed on the top or bottom, depending on your preferred camera location. Pushing 1500TVL at just .001 Lux with a nicer lens distortion!
2. OEM Camera: Reuse your existing OEM camera (OEM camera not included). The housing design is reversible, allowing you to pivot the housing at the top or bottom, depending on your preference. The connector for the OEM camera must always face down due to its design.
3. Both - Best Value!: Can’t decide? Get both our camera and the housing for your OEM camera, so you have your OEM one as a backup. Cameras are just a quick snap to change!
• Note: Relocation further than 1 FT requires purchase of extension cables (Sold in our Accessories Section). Due to the higher image quality of our camera, F150 and Superduty 23-25 models may experience a slight “step effect” on curved lines if you look closely. This anomaly is not present in 2017-2022 Super Duty models.
• Pictures shown is an F150
Warranty: This product comes with a 1-year warranty.
Included with purchase:
1 x CSPNW High Resolution Camera (with CSPNW Camera Option) or 1 x OEM Housing or Both Depending on OPTION Selected
1 x Buckle Style Pivot Removable Mounting System
1 x Buckle Style Low Profile Mounting System
1 x Black Anodized Aluminum Buckle Mounting Plate (ability for hardware install)
1 x 3M Adhesive Pad for Mounting Plate for quick install
1 x Ford Adapter Plug Cable
1 x Thumb screw
2 x Zip Ties
2 x Zip tie adhesive mounts
SPECIFICATIONS:
FOV: 150-H 120-V
LUX: 0.001
Input Voltage: 5-16V
Power Consumption: .1A @ 14V +/- 15%
Camera Dimensions: 1.8” H x 1.4” D x 1.2” W
Working Temperature: ~ 0F - 125F
